Chapter 2 Hardware Installation; Installation Method - Tenda PW201A User Manual

Chapter 2 Hardware Installation

2.1 Installation Method

Method 1
Establish a Powerline network for LAN communication. Simply plug the
Tenda PW201A and Tenda P200 (Powerline adapter) into different wall
outlets within the same power circuitry and set IP addresses of PCs on LAN
to the same net segment as the Powerline devices. And the PCs will be able
to intercommunicate.
Method 2
Connect Powerline Network to Internet. Connect a Powerline adapter,
say, Tenda P200, to an Internet-enabled ADSL Modem Router using an
Ethernet cable; plug the PW201A into another wall outlet within the same
PW201A Wireless N Powerline AP User Guide
Figure 1-3 Establish a Powerline Network
13