Configuration - Tenda teg2124t User Manual

300m wireless ap

Hide thumbs Also See for teg2124t:

Table of Contents

Log Setup

Click Tools > Logs > Log Setup to configure system logs. Here you can set up number of logs and rules

of log settings. Up to 300 entries can be logged. The default is 150.

To configure the log server:

Click Add to add a log server.

Specify the IP address and port of the syslog server on your LAN and enable the log server.

Check the "To use the following rules, you must check this checkbox." option.

If configured successfully, the system will begin to log events and simultaneously send them to the specified

log server on your LAN. You can view all logs there.

3.7.4 Configuration

Backup & Restore

Click Tools > Configuration > Backup & Restore to enter screen below. This section allows you to save a

copy of the device configurations on your local hard drive or to restore the previous configurations back to the

device.

300M Wireless AP

Table of Contents