Device Installation
2 Device installation
2.1 Installation preparations
2.1.1 Environment requirements
Item
Requirement
Temperature -30℃ ~ 55℃
10%~90%RH (non-condensing)
Humidity
2.1.2 Check your device
To check whether the device works normally or not, please do as follows:
1.
Connect the device to the PoE port of the power adapter with the included Ethernet cable.
2.
Plug the power adapter to a power outlet with the included power cord.
If the device works normally, when the device is powered on, the LED status should be solid or blinking.
LED
LAN/WAN
(PoE LAN/WAN)
Status
Description
solid
The device is not transmitting data.
blinking
The device is transmitting data.
- 8 -