Chapter 2 Product Installation - Tenda W301A User Manual

Hide thumbs Also See for W301A:

Table of Contents

One Network Cable

Four plastic covers

If any of listed items are missing or damaged, please contact the Tenda

reseller from whom you purchased for replacement immediately.

Chapter 2 Product Installation

You are recommended to install the product after configuring the

settings of W301A according to the guide in chapter 3. The following

steps take AP mode for example.

Use the included power adapter to power on the AP. You can also

use POE power supply or POE switch to power on the AP.

Connect one end of the network cable to the LAN port of W301A,

and another end to your Ethernet broadband, switch or PC.

Connect wireless adapter to W301A.

Please refer to the topology below:

Table of Contents