Time - Tenda teg2124t User Manual

300M Wireless AP
5. When the firmware upgrade completes, the device will automatically restart.
6. Restore the AP to factory default settings after reboot.
Note
When uploading software to the wireless AP, it is important not to disconnect the device from power supply. If
the power supply is interrupted, the upload may fail, corrupt the software, and render the device inoperable.
When the upload completes, the device will automatically restart. The upgrade process typically takes about
several minutes.
Reboot
The Reboot option restarts the device. All connections will be lost while rebooting.
Click Tools > Maintenance > Reboot to enter screen below:

3.7.2 Time

System Time
Click Tools > Time > System Time to enter the system time screen. This page is used to set the device's
system time. System time can be configured using the following 2 methods:
Sync with Internet time servers: If enabled, system automatically connects to NTP server on the Internet to
synchronize the time.
Set Time and Date Manually/Sync with Your PC: Specify the time and date manually or click Sync with
Your PC to automatically copy your current PC's time to the device.
25