Wireless; Basic - Tenda teg2124t User Manual

300m wireless ap

Hide thumbs Also See for teg2124t:

Table of Contents

300M Wireless AP

Note

1. The default LAN IP address is 192.168.0.254 and subnet mask is 255.255.255.0.

2. In order to log in to the Web interface, make sure LAN IP address and IP of your PC are on the same

network segment.

3. If you change this IP address, you must use the new one to re-log in to the device.

4. If in the WDS mode or AP Client mode, address mode of the LAN IP address should not be Dynamic IP.

3.5 Wireless

Click Wireless > Basic to configure the available wireless settings.

1. SSID: Select a SSID from the drop-down list. It supports 4 SSIDs at most.

2. Enable: Once checked, the wireless feature will be enabled.

3. Hide SSID Automatically: When number of clients outnumbers the maximum value, SSID will be hidden

automatically.

4. Broadcast SSID: This option allows you to have your network name (SSID) publicly broadcast or if you

choose to disable it, the SSID will be hidden. It is enabled by default.

5. AP Isolation: Isolates clients connecting to the same SSID.

6. Maximum Clients: Here you can configure the number of clients (1~60) that can connect the current

SSID.

7. SSID: Displays the SSID name and you can change the name here.

8. Security Mode: Configure security settings for the current SSID. This device supports WEP, WPA-PSK,

Table of Contents