Description Of The Rear Panel - NPI ELC-03XS Operating Instructions And System Description

_________________________________________________________________________________________________________________
(51) CAPACITY COMP. (CC) potentiometer
Ten-turn potentiometer for the capacity compensation of the electrode in CC mode
(ten turn potentiometer, clockwise, range: 0-30 pF).

4. Description of the Rear Panel

Figure 3: ELC-03XS rear panel view
MONITORING OUTPUT connectors
(1) FILTER CURRENT connector
BNC connector providing a voltage monitoring the position of the CURRENT FILTER
switch (-7 V to +8 V, 1V/STEP).
(2) CURRENT SENSITIVITY connector
BNC connector providing a voltage monitoring the position of the CURRENT OUTPUT
SENSITIVITY switch (+1 V to +7 V, 1V/STEP).
(3) LP FILTER POTENTIAL connector
BNC connector providing a voltage monitoring the position of the POTENTIAL
LOWPASS FILTER switch (-8 V to +7 V, 1V/STEP).
(4) HP FILTER POTENTIAL connector
BNC connector providing a voltage monitoring the position of the POTENTIAL
HIGHPASS FILTER switch (-8 V to +7 V, 1V/STEP).
(5) POTENTIAL SENSITIVITY connector
BNC connector providing a voltage monitoring the position of the POTENTIAL OUTPUT
GAIN switch (+1 V to +7 V, 1V/STEP).
RANGE connector
(6) HEADSTAGE connector
BNC connector for remote control of a switchable headstage (ELC-SWI, optional). A TTL
HI (+5 V) signal switches the feedback resistance in the switchable headstage from 1 M
to 10 M or from 1 M to 100 M. To which resistor is indicated by a box to the left.
___________________________________________________________________________
version 2.2
ELC-03XS User Manual
page 19