Table of Contents
Advertisement
Engine from vehicle
- Undo the 2 screws fixing the rear brake calliper.
- Remove the calliper and its pipes from the muffler
supporting arm.
- Undo the 2 screws fixing the swinging arm to the
engine.
- Remove the muffler support arm
- Slide off the entire wheel with its disc from the wheel axle. Move the right shock absorber backwards
to facilitate removing the wheel.
- Use a jack to support the vehicle properly. Re-
move the engine-swinging arm fixing pin by undo-
ing the nut and the head of the pin as shown in the
photograph.
- The engine is now free.
When refitting the engine onto the scooter, carry out the removal operations but in reverse order and
respect the tightening torques shown in the Specifications Chapter.
-Check the engine oil level and if necessary top it up with the recommended type.
ENG VE - 6
Downloaded from
www.Manualslib.com
manuals search engine
X7 250ie
Advertisement
Table of Contents
