PIAGGIO X7 250ie Service Station Manual page 204

Suspensions
- Lock hydraulic rod rotation using a 19-mm hex-
agonal spanner.
- Fit the oil seal retaining circlip.
- Grease and fit a new dust guard.
- Fit the fork leg together with the stem on the fork
supporting clamp until it stops.
- Tighten the two screws to the prescribed torque
in the sequence indicated in the photograph.
Locking torques (N*m)
Stem support clamp tightening screws 20 ÷ 25
SUSP - 12
Downloaded from www.Manualslib.com manuals search engine
X7 250ie