PIAGGIO X7 250ie Service Station Manual page 76

Engine from vehicle
This section describes the operations to carry out when removing the engine from the vehicle.
Exhaust assy. Removal
- Remove the Lambda probe from its support and
disconnect it.
- Undo the two exhaust manifold fixings on the
head. To undo the nuts fixing the muffler flange to
the head properly, you must use a jointed wrench
that enables you to get at the right nut as well, ac-
cording to the direction of travel, that is difficult to
get at with a traditional straight wrench.
- Undo the three screws fixing the muffler to the
support arm.
Remove the full muffler unit.
Remove the lambda probe from the manifold.
ENG VE - 2
Downloaded from www.Manualslib.com manuals search engine
X7 250ie