PIAGGIO X7 250ie Service Station Manual page 214

Suspensions
Removal
- Place the scooter on its centre stand;
- Remove the swinging arm/engine fitting shown in
the photo
- Move the engine back
- remove the spring anchoring the swinging arm to
the frame as shown in the photo
- Remove the two screws fixing the buffer support
bracket to the frame
- Undo the nut on the LHS shown in the figure and
remove the corresponding bolt from the opposite
side.
- Remove the swinging arm.
SUSP - 22
Downloaded from www.Manualslib.com manuals search engine
X7 250ie