PIAGGIO X7 250ie Service Station Manual page 208

Suspensions
- Insert the spacer.
- Insert the lower tightening ring nut, screw until it
stops and, with the specific tool, tighten to the pre-
scribed torque.
Specific tooling
020055Y Wrench for steering tube ring nut
Locking torques (N*m)
Steering tube lower ring nut 14 ÷ 17
- Fit the spacer between the two ring nuts on the
steering tube in the position indicated.
SUSP - 16
Downloaded from www.Manualslib.com manuals search engine
X7 250ie