Table of Contents
Advertisement
WPS-750-DOM-AH Installation Manual
EXPOSURE
AGC (Auto Gain Control) Setup
AGC mode automatically amplifies the
video signal during low light conditions.
• Adjust the AGC by selecting OFF, LOW,
MIDDLE, or HIGH. Please note that signal
noise is slightly higher when AGC is enabled.
SHUTTER Setup
Shutter setup allows for control of the electronic shutter speed. Select
a shutter speed to match the lighting condition of the environment
and the goal of the camera location.
• Choose from AUTO, OFF, A. FLK, 1/160, 1/250, 1/500, 1/700, 1/1000,
1/1600/ 1/2500, 1/5000, 1/7000, 1/10000, 1/30000, 1/50000, 1/90000,
X2, X3, X4, X5, X6, X8, X10, X12, X14, X16, X24, X32, X64, X128, X256, X512.
• For environments with unstable lighting conditions, the AUTO setting
is recommended.
• For darker environments with fixed lighting conditions, select a
slower shutter speed.
• For brighter environments with fixed lighting conditions, or
scenarios in which fast-moving objects must be captured,
select a faster shutter speed, such as 1/1000 seconds.
• A. FLK controls the flickering effect on the screen resulting from
different video refresh rates, e.g. PAL (50 Hz, 60 Hz) and NTSC
(50 Hz, 60 Hz). In such cases, set the shutter to A. FLK(1/100) to
accommodate the different refresh rates.
SENSE-UP Setting
The SENSE-UP feature enhances the sensitivity of the camera and
allows the camera to display bright images even under extremely
dark conditions. SENSE-UP slows the shutter speed while increasing
the brightness for superior low-lux performance.
• OFF: Deactivates the SENSE-UP function.
• AUTO: Activates the SENSE-UP function. Select the SENSE-UP level
from X2 to X512.
Note : The SENSE-UP function is only available when SHUTTER
is set to AUTO.
INITIAL SET
Returns the exposure settings to factory default.
16
<EXPOSURE>
AGC
HIGH
SHUTTER
AUTO
SENSE-UP
AUTO X8
INITIAL SET
PREVIOUS
Advertisement
Table of Contents
