Obtaining Product Isotherm Models; Loading And Organizing Product Models - Decagon Devices AquaLab 4TE Operator's Manual

AquaLab
10. Duo Operation (Optional)

Obtaining Product Isotherm Models

Since the isotherm relationship for each product is unique,
each product's isotherm model must be determined ex-
perimentally. Th is only needs to be done once, but must
be done prior to testing moisture content with the DUO.
Th ere are several strategies that can be used to generate models.
Please contact Decagon for information on model development.

Loading and Organizing Product Models

A Product's model must be loaded into the Series 4TE DUO before
it can calculate moisture content. Each product must have its own
model and the model can either be loaded at the factory by Decagon
or by using the AquaLink RG software program. Th is software is
included with each DUO purchase or upgrade. Product model fi les
generated by Decagon are sent to customers via email and can then
be loaded into the instrument by connecting to the instrument us-
ing the AquaLink RG software. Th e software uses a model loading
tool to add and remove product models from the Series 4TE DUO,
allowing the user to control and organize their product models. Up
to 100 models can be stored on the instrument. Th e AquaLink RG
software can also download data (including moisture content) from
the instrument, present the data in table form, fi lter the data, and
print reports.
56