Decagon Devices AquaLab 4TE Operator's Manual page 48

AquaLab
7. Verifi cation and Calibration
Adjust for Linear Off set
1. Once you are certain a linear off set has occurred, toggle to the
Confi guration tab by pressing the Menu icon button. Calibration is
the fi rst option highlighted in the confi guration tab. Press the Enter
icon button to begin the verifi cation process. You will be guided
through the linear off set routine through on screen commands. Th e
following screen will appear:
NOTE: Th e DUO model will show both water activity and moisture
content on this screen. For TEV Models, make sure you have the
correct sensor selected.
.
2. Press the Enter button to start the linear offset process. To
return to the main menu, press the cancel button. After pressing
the enter button, the following screen will appear:
42