Assembly Instructions - Hotsy 1467SS Operator's Manual

Unpacking
Unpack carefully. Wear safety glasses or goggles while un-
packing, assembling or operating pressure washer. If there
are missing components or hidden damage immediately
contact distributor or carrier concerning discrepancies.
1. Cut strapping band from pressure washer and pallet.
2. Remove pressure washer from pallet.
Parts Included
• Pressure Washer
• Pressure Hose
• Hose Hanger
• Wand
• Wand Holder
• Hose Reel Mount W/Hardware
• Trigger Gun
• Porta Gear Kit
• Operating Instructions and Parts Manual
Tools Required
• 10" Adjustable Crescent Wrenches (2 ea.)
• Blade Screwdriver
Pressure Hose
1. Use teflon tape on plumbing connections to prevent
leakage.
2. Install pressure hose on machine as shown.
Pressure Hose

ASSEMBLY INSTRUCTIONS

Relief Valve
89413660-4
HOTSY 900-1400 OIL FIRED • 8.941-366.0 • Rev. 6/11
Wand Components
1. Assemble wand components as shown. Connect
pressure hose to trigger gun.
Quick Disconnect Plug
Disconnect
Trigger Gun
Pressure Hose
NOTE: The nozzle is not to be installed at this time.
2. Make sure that all plumbing connections are tight.
Hose Hanger
1. Install the hose hanger on the machine coil tank as
shown.
Hose Hanger
Wand
Quick
Pocket On
Coil Tank
11