Edit Scenes - Panasonic SC-HT1000 Operating Instructions Manual

Edit Scenes

5
Press [2, 1] to select the item (Add, Move, Re-edit or Erase) and press [ENTER].
1 10/23 0:03 004 Dinosaur
PLAY LIST
Edit Scenes
Add Move Re-edit Erase
003
001 00:00.19 002
Select Page
004 - - -
- - -
0 ~ 9
SELECT
- - - - - - - - -
ENTER
Prev. 001 / 001 Next
RETURN
Add (maximum of 999 scenes)
6
Press [3, 4, 2, 1] to select the place
where you want to add the scene and
press [ENTER].
7
Press [ENTER] at the start point of the
scene.
PLAY LIST No.3 Dinosaur
PLAY LIST
Add Scenes
Scene No.
01 PLAY
Start
End
Next
3 0 : 00 . 05
SELECT
Start
ENTER
RETURN
--:--.--
0 : 00 . 05
8
Press [ENTER] at the end point of the
scene.
To add other scenes
Press [3, 4] to select "Next" and press [ENTER], then repeat steps
6–8.
9
Press [3, 4] to select "Exit" and
press [ENTER].
The new scene is inserted before the highlighted scene.
Move
6
Press [3, 4, 2, 1] to select the
scene and press [ENTER].
7
Press [3, 4, 2, 1] to select the place
where you want to move the scene to
and press [ENTER].
The scene is moved and inserted before the highlighted
scene.
To move other scenes
Repeat steps 6 and 7.
[Note]
≥You can use basic functions like fast forwarding and slow play (➡page 18).
≥You can use the skip function to jump to another program (➡page 18).
≥You cannot specify an end point before a start point.
≥You may not be able to specify points within 3 seconds of each other.
≥Play pauses if the end of the last program is reached during this procedure.
≥Depending on the state of recording, the actual number of play lists or scenes that can be recorded may be less than that specified in this
manual.
≥You cannot edit still picture images.
To show scene 10 and later
Press [3, 4, 2, 1] to select "Next" and press [ENTER].
You can also select a page of scenes with the numbered buttons.
[0] ➡ [0] ➡ [5]
e.g., "5":
[0] ➡ [1] ➡ [5]
"15":
5
Exit
End
Re-edit
6
Press [3, 4, 2, 1] to select the
scene and press [ENTER].
7
Press [ENTER] at the start point of the
scene.
PLAY LIST No.3
PLAY LIST
Re-edit Scenes
Scene No.
01 PLAY
Prev.
Start
End
3 3 0 : 02 . 08
SELECT
Start
ENTER
RETURN
0 : 00 . 05 0 : 02 . 08
8
Press [ENTER] at the end point of the
scene.
To re-edit other scenes
Press [3, 4] to select "Prev." or "Next" and press [ENTER], then
repeat steps 6–8.
9
Press [3, 4] to select "Exit" and
press [ENTER].
The re-edited scene replaces the old one.
Erase
6
Press [3, 4, 2, 1] to select the
scene and press [ENTER].
7
Press [2] to select "Yes" and press
[ENTER].
The selected scene is erased from the play list.
To erase other scenes
Repeat steps 6 and 7.
[Note]
The play list itself is erased if you erase all the scenes in it.
1
Next
Exit
End
RQT7061
29