Konica Minolta bizhub PRESS C1100 Quick Manual page 102

7.2 Name of each Component
No. Name
1 Main power switch
2 Toner access door
3 Toner bottle cover (Y, M, C, K)
4 Drum unit
5 Conveyance fixing unit
6 Lever [M1]
7 Fixing unit
8 Side guide lock knobs
9 Feed roller
10 Side guide plates
11 Side guide lock release lever
12 Rear guide plate
13 Rear guide lock release lever
WARNING
WARNING WARNING
NEVER throw the waste toner box into a fire.
-
Otherwise, the toner may ignite and cause a dangerous situation.
CAUTION
CAUTION
DO NOT touch the fusing part of the conveyance fixing unit. Otherwise, you may get burned.
-
Please be especially careful in withdrawing the conveyance fixing unit or opening the fusing part.
CAUTION
CAUTION
DO NOT put your hand or arm between the main body and the conveyance fixing unit.
-
Touching connecting terminals of electric parts may damage the machine or cause unexpected
trouble. Please do not try to work yourself, but contact your service representative.
7-5
Description
Turns the main power of the machine on or off.
The main power is basically turned on or off by your service rep-
resentative. Be sure not to turn the main power switch off in usu-
al operation.
When adding toner, press the left-hand lever to open this door.
Open when placing a toner bottle in the machine.
Toner bottles are classified into four colors: yellow (Y), magenta
(M), cyan (C), and black (K).
Generates a print image.
Pulled out to remove jammed paper. For information about how
to handle levers and knobs of the conveyance fixing unit, refer
to the screen displayed when a paper jam has occurred.
Locks the conveyance fixing unit.
If a paper jam has been detected, push this lever down to the left
and pull out the conveyance fixing unit.
Fuses toner on paper by heat and pressure.
Fixes the side guide plates.
Rotates when feeding paper into this machine.
Aligned to the edges of loaded paper.
When moving the side guide plates, push this lever to the back
to release the lock.
Aligned to the rear edge of loaded paper.
When moving the rear guide plate, push this lever to the left
side to release the lock.