5.1
Both Sides Adjustment
P
Press [X] or [Y] at each point, then enter the measured value using the keypad, [,], or
[+] on the screen.
-
If the printing position is misaligned to the minus (–) side, enter a positive value (+). If the printing
position is misaligned to the plus (+) side, enter a negative value (–).
-
To reset a value, press [Clear].
-
To switch the positive sign (+) and negative sign (–), press [+/–].
Q
When entry processing is completed,
press [Adjustment Start].
R
After the adjustment is completed, press
[OK].
To finely adjust the adjustment value,
continuously proceed to step 4 in "Zoom and
Image Shift Adjustment" (page 5-13).
5-12