When Transmitting By A One-Touch Number - Konica Minolta Di3510f User Manual

6.1 Performing One-Touch Dial Transmission

When transmitting by a one-touch number

Each One-Touch key has a One-Touch Number. A destination is selected by
inputting the One-Touch Number (000~539) instead of pressing the One-Touch
key.
One-Touch Numbers are indicated with an index as shown:
<Index 1>
1
Set the original in the paper feed tray or on the glass.
2
Press the [Fax/Scan] key.
3
Press the [#] key.
4
Input a three-digit one-touch
number using the 10-Key Pad.
The one-touch key for the input
one-touch number is highlighted.
5
Press the [Start] key.
❍
When the original is set on the
original glass, after is scanned,
touch [Scan End].
6
Check the transmission content in
the notification screen.
❍
When multiple destinations
have been specified, check the
transmission content of each transmission in the notification screen, and
touch [Enter].
Di2510f/Di3010f/Di3510f
<Index 36>
6
6-3