Auto Document Feeder Unit Open/Close; Original Size Detection - Konica Minolta bizhub c10 Service Manual

Theory of operation ver. 2.0 Nov. 2007
7.3.2

Auto document feeder unit open/close

• To prevent the auto document feeder unit from being raised or lowered when the IR unit
is opened or closed, the auto document feeder unit is secured to the IR unit when the IR
unit is to be opened or closed.
• When the IR unit lock release lever is pulled, the ADF lock lever is rotated through cou-
pling of gears. This causes the auto document feeder unit to be secured to the IR unit.
IR unit lock release lever
ADF lock lever is engaged
7.3.3

Original size detection

• Since the scanner is not mounted with any original size detection sensors, the scanning
range of the scanner is determined according to the paper size setting made on the con-
trol panel.
If the correct paper size is not selected on the control panel or the paper of the correct
size is not loaded in the tray, the machine gives an error message on the control panel
after the print cycle.
Confidential – for internal use only, do not distribute
7. Scanner section (IR section)
ADF lock lever
ADF in locked condition
4139T2C549AA
17