Konica Minolta Di3510f User Manual page 107

9
Term
Protocol
Super G3
Terminal Adapter (TA)
Touch-tone Signal
Transmission Post
9-8
Explanation
This is the communication agreement necessary for communication.
This is a high-speed transmission mode for facsimile on analog lines
(generally added telephone lines) recommended by ITU-T (International
Telecommunications Union).
Two second per page faxing is possible in G3 mode by adopting the
[V.34 Facsimile System] and the [JBIG Encoding Format] (When
transmitting a 700 character A4 document at a standard resolution of
3.851 line/mm).
This is a device for connecting a PC, analog telephone, G3 fax, etc., to a
digital line. Some are used connected to the DSU (Digital Service Unit)
by the terminal adapter, and some have an internal DSU.
This is the signal of the beeping sound audible when using touch-tone
dialing as one of the signals used in the telephone line. This is used when
making a telephone call with a touch-tone line, when using a touch-tone
service, etc.
It is possible to use a service using a touch-tone signal even on an
analog line by pressing the [
When sending documents to the same destination, accumulate the
multiple documents, and batch transmit then at a designated time and
time interval. Refer to "Configuring the Utilities and Fax" in the Advanced
Operations volume.
9.3 List of Terms
] key on the 10-Key Pad.
Di2510f/Di3010f/Di3510f