Inserting The Destination's Name; Inserting The Destination - Konica Minolta Di3510f User Manual

6

Inserting the destination's name

It is possible to add the TSI name and destinations name before transmission.
Tip
Refer to the destination registered in the one-touch keys for destination name
insertion. It is necessary to register the destination beforehand in the one-touch
keys.
Destination insertion cannot be designated during dial transmission or chain-
dial transmission. These TSI can be up to 20 characters in length.
Destination insertion can only be set when the TSI in set. For details, refer to
Registering TSI Names of "Settings and FAX Items for the Administrator" in the
Advanced Operations volume.

Inserting the destination

1
Set the original in the paper feed tray or on the glass.
2
Press the [Fax/Scan] key.
3
Touch [FAX Menu].
4
Touch [Set 1], then touch
[Dest.Insert].
5
Designate the destination.
❍ Designation using the one-touch keys (See p. 6-2).
❍ Performing dial transmission (See p. 2-3).
❍ Designation using a fax program (See p. 6-5).
6
Press the [Start] key.
❍ The designated destination insertion is released once transmitted.
6-12
6.6 Various Transmission Settings
Di2510f/Di3010f/Di3510f