Table of Contents
Advertisement
3. Operation
The Network Camera can be used with Windows operating system and browsers. The recommended
browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome with Windows.
3.1 Access from a browser
1.
Start a browser (Internet Explorer).
2.
Enter the IP address or host name of the Network Camera in the Location/Address field of your
browser.
3.
You can see a starting page. Click Live View or Setup to enter web page.
4.
The network camera's Live View page appears in your browser.
3.2. Access from the internet
Access from the internet once connected, the Network Camera is accessible on your local network
(LAN). To access the network camera from the Internet you must configure your broadband router to
allow incoming data traffic to the network camera. To do this, enable the NAT-traversal feature, which
will attempt to automatically configure the router to allow access to the network camera. This is
enabled from Setup > System > Network > NAT.
For more information, please see "3.5.5 System>Network>NAT" of User's Manual.
8
Advertisement
Table of Contents
