Removing The Inner Panel (Fz8Sa); Installing The Inner Panel (Fz8Sa); Removing The Side Panel (Fz8Sa); Installing The Side Panel (Fz8Sa) - Yamaha FZ8NA Service Manual

EAS39P1404

REMOVING THE INNER PANEL (FZ8SA)

1. Remove:
• Inner panel "1"
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. First remove the right inner panel, and then
remove the left inner panel.
b. Remove the quick fastener and the bolts.
c. Slightly lift the rear of the inner panel and
then disengage projections "a".
d. Disengage projections "b", sliding the inner
panel obliquely backward as shown in the
illustration, and then remove the inner
panel.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS39P1405

INSTALLING THE INNER PANEL (FZ8SA)

1. Install:
• Inner panel
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. First install the left inner panel, and then
install the right inner panel.
b. Align the projections of the inner panel with
the slots of the front cowling and then slide
the panel forward.
c. Fit inner panel bracket "a" into the slot of
the inner panel so that the bracket is
securely inserted to the stop position.
GENERAL CHASSIS
d. Press the rear of the inner panel downward
to engage projections "b".
e. Install the quick fastener and bolts.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS39P1406

REMOVING THE SIDE PANEL (FZ8SA)

1. Remove:
• Side panel "1"
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the inner panel.
b. Remove the turn signal light lead from the
clump, and then disconnect the turn signal
light lead connectors.
c. Remove the quick fastener and the bolt,
and then slide the panel forward to remove
it.
1
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS39P1407

INSTALLING THE SIDE PANEL (FZ8SA)

1. Install:
• Side panel
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Fit the projections on the panel into the
slots and slide it backward.
4-9