Removing The Clutch - Yamaha FZ8NA Service Manual

Hide thumbs Also See for FZ8NA:
Table of Contents

Advertisement

EAS30712

REMOVING THE CLUTCH

1. Remove:
• Clutch cover "1"
• Gasket
TIP
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
2. Remove:
• Compression spring bolts "1"
• Compression springs
• Pressure plate "2"
• Pull rod "3"
3. Remove:
• Friction plate 1 "1"
4. Remove:
• Clutch plate 1 "1"
• Friction plate 2
5. Straighten the clutch boss nut rib "a".
6. Loosen:
• Clutch boss nut "1"
TIP
While holding the clutch boss "2" with the uni-
versal clutch holder "3", loosen the clutch boss
nut.
Universal clutch holder
90890-04086
YM-91042
5-49
CLUTCH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fz8sa

Table of Contents