Periodic maintenance and adjustment
Removing and installing the
panel
The panel shown needs to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time the panel needs
to be removed and installed.
7
1. Panel A
Panel A
To remove the panel
1. Remove
the
screws, and then pull the panel
outward and slide it downward as
shown.
EAU18752
1
1. Quick fastener screw
1
EAU63101
1. Panel A
2. Quick fastener screw
2. Disconnect the turn signal light
lead coupler.
quick
fastener
2
1
7-9
1
1. Turn signal light lead coupler
To install the panel
1. Connect the turn signal light lead
coupler.
2. Place the panel in the original po-
sition, and then install the quick
fastener screws.