Yamaha FZ8NA Service Manual page 229

5. Connect the test coupler adapter "1" to the
ABS test coupler "2".
Test coupler adapter
90890-03149
6. Set the engine stop switch "1" to "
7. Turn the main switch to "ON".
8. Push the start switch "2" for at least 4 sec-
onds.
ECA14790
Do not operate the brake lever or the brake
pedal.
9. After releasing the start switch, operate the
front brake lever and the rear brake pedal
simultaneously.
ABS (ANTI-LOCK BRAKE SYSTEM)
10. A reaction-force pulsating action is gener-
ated in the front brake lever "1" 0.5 second
after the brake lever and brake pedal are
operated simultaneously and continues for
approximately 1.5 seconds.
TIP
• The reaction-force pulsating action consists
of quick pulses.
• Be sure to continue operating the brake lever
and brake pedal even after the pulsating
action has stopped.
".
11. After the pulsating action has stopped in
the front brake lever, it is generated in the
rear brake pedal "1" 0.5 second later and
continues for approximately 2 seconds.
TIP
• The reaction-force pulsating action consists
of quick pulses.
• Be sure to continue operating the brake lever
and brake pedal even after the pulsating
action has stopped.
4-62