Removing And Installing The Panel; Checking The Spark Plugs - Yamaha XV250N1 2021 Owner's Manual

Removing and installing the
panel
The panel shown needs to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time the panel needs
to be removed and installed.
1. Panel A
Panel A
To remove the panel
Pull the rear of the panel out, and then
slide the panel forward to release it in
the front.
Periodic maintenance and adjustment
EAU18752
To install the panel
Secure the front of the panel, and then
push the rear of the panel in.
EAU19511

Checking the spark plugs

The spark plugs are important engine
components, which are easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
plugs should be removed and checked
in accordance with the periodic main-
tenance and lubrication chart. In addi-
tion, the condition of the spark plugs
can reveal the condition of the engine.
To remove a spark plug
1. Remove the spark plug cap.
1. Spark plug cap
2. Remove the spark plug as shown,
7-9
with the spark plug wrench includ-
ed in the owner's tool kit.
EAU19546
7