Yamaha FZ8NA Service Manual page 403

7. Check the cylinder identification
sensor.
Refer to "CHECKING THE CYLIN-
DER IDENTIFICATION SENSOR"
on page 8-201.
OK↓
8. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-179.
OK↓
9. Check the engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 8-179.
OK↓
10.Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-179.
OK↓
11.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-179.
OK↓
12.Check the clutch switch.
Refer to "CHECKING THE
SWITCHES" on page 8-179.
OK↓
13.Check the relay unit (starting circuit
cut-off relay).
Refer to "CHECKING THE
RELAYS" on page 8-189.
OK↓
14.Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-191.
OK↓
15.Check the lean angle sensor.
Refer to "CHECKING THE LEAN
ANGLE SENSOR" on page 8-194.
OK↓
NG→
Replace the cylinder identification
sensor.
NG→
Replace the main switch/immobilizer
unit.
NG→
Replace the right handlebar switch.
NG→
Replace the neutral switch.
NG→
Replace the sidestand switch.
NG→
Replace the clutch switch.
NG→
Replace the relay unit.
NG→
Replace the relay unit.
NG→
Replace the lean angle sensor.
8-8
IGNITION SYSTEM