Yamaha FZ8NA Service Manual page 196

5. Install:
• Rear brake caliper
• Rear brake caliper retaining bolts
6. Adjust:
• Drive chain slack
Refer to "ADJUSTING THE DRIVE
CHAIN SLACK" on page 3-19.
Drive chain slack
20.0–30.0 mm (0.79–1.18 in)
7. Tighten:
• Wheel axle nut
• Rear brake caliper retaining bolts
Wheel axle nut
150 Nm (15 m·kgf, 108 ft·lbf)
Rear brake caliper retaining bolt
(front)
27 Nm (2.7 m·kgf, 20 ft·lbf)
Rear brake caliper retaining bolt
(rear)
22 Nm (2.2 m·kgf, 16 ft·lbf)
LOCTITE®
EWA13500
WARNING
Make sure the brake hose is routed prop-
erly.
TIP
When tightening the wheel axle nut, there
should be no clearance "a" between the adjust-
ing block "1" and adjusting bolt "2".
4-29
REAR WHEEL