Management Port - Avaya 4000 Series Quick Start Configuration

Table 2: Secure and nonsecure protocols
Nonsecure
protocols
FTP
Telnet
SNMPv1, SNMPv2
Rlogin
HTTP

Management port

The ERS 4000 series hardware is not equipped with a designated out-of-band (OOB)
management port. Use the management port for OOB management when an IP address is
assigned to that port. Use the console interface or the in-band switch IP address set from the
console terminal through any network port to manage the switch. Before you can use the OOB
Quick Start Configuration for Avaya ERS 4000 Series
Default status
Disabled SCP
Disabled SSH v1, v2
Avaya recommends
that you use SSHv2
instead of SSHv1.
Enabled SNMPv3
You must load the
DES/AES image on
the platform to use
SNMPv3. For more
information, see
Configuring Security
on Avaya Ethernet
Routing Switch 4000
Series,
NN47205-505.
Disabled Secure SHell (SSH)
v1, v2
Disabled HTTPS
Equivalent secure
protocols
Disabled
Disabled
Enabled
Disabled
Enabled
Important:
Avaya
recommends that
you take the
appropriate
security
precautions within
the network if you
use HTTP.
Management port
Default status
November 2013 15