Avaya 4000 Series Quick Start Configuration page 18

Fundamentals
When you access EDM, the first panel in the work area displays a switch summary view. The
tab behind the summary view is a real-time physical view of the front panel of the device or
stack called the Device Physical View.
Objects in the Device Physical View are:
• a stand-alone switch, called a unit
• a switch stack, called a chassis
• a port
From the Device Physical View, you can
• determine the hardware operating status
• select a switch or a port to perform management tasks on specific objects or view fault,
configuration, and performance information for specific objects
Click to select an object. The system outlines the object in yellow, indicating that the object is
selected.
The conventions on the device view are similar to the actual switch appearance except that
LEDs in Device Physical View do not blink. The LEDs and the ports are color-coded to reflect
hardware status. Green indicates the port is up and running; red indicates that the port is
disabled.
From the menu bar, you can click the Device Physical View tab to open the Device Physical
View any time during a session.
Figure 1: Device Physical View
EDM window
The EDM window contains the following parts:
18 Quick Start Configuration for Avaya ERS 4000 Series
Comments? infodev@avaya.com
November 2013