Applications; Xml Applications (V1R3.X Only); Basic Configuration - Siemens OpenStage 20 Administration

administration.fm
Administration

Applications

3.12 Applications
3.12.1

XML Applications (V1R3.x only)

The XML application interface is available for the OpenStage 60/80 phones running
>
V1R3.x software.
3.12.1.1

Basic Configuration

The XML interface enables server-based applications with a set of GUI elements. The techno-
logies commonly used in web applications can be used: Java Servlets, JSP, PHP, CGI etc., de-
livered by servers such as Tomcat, Apache, Microsoft IIS.
Xpressions is a special Unified Communications application which also uses the XML interface.
To configure an XML application on the phone, enter the access data for the application on the
server:
The Display name can be defined freely. This name will appear in the applications tab once
the application is configured, and it will appear in a newy created tab when the application is
running. With Xpressions, this value is predefined as „Xpressions".
The Application name is used by the phone software to identify the XML application running
on the phone. With Xpressions, this value is predefined as „Xpressions".
The Protocol for exchanging XML data with the server-side program can be set to „HTTP" or
„HTTPS".
The Server address is the IP address or domain name of the server which hosts the remote
program. Server port number specifies the corresponding port.
Program name specifies the relative path to the servlet or to the first XML page of the applica-
tion on the server. The relative path refers to the root directory for documents on the web serv-
er. The program name cannot be longer than 100 characters.
XML trace enabled determines whether debugging information is sent to a special debugging
program on the remote server. The relative path for the debugging program is given by the De-
bug program name parameter.
3-98
A31003-O1010-M100-3-76A9, 12/09/2007
HiPath 8000 - OpenStage Family, Administrator Manual