3.4.3.3
Response Timer
The Response timer is started whenever the phone sends a new message to the SIP server.
If the timer expires before the phone gets a response from the SIP server, the phone assumes
that the server had died and then attempts to contact the backup server, if configured. If there
is no backup server configured, the phone just tidies up internally.
The data is given in milliseconds. The default value is 32 000; for the HiPath 8000, the recom-
mended setting is 3.7 seconds (3700 ms).
Administration via WBM
Administration via Local Phone
|
--- Administration
|
--- System
|
--- SIP Interface
|
--- Response timer (ms)
A31003-O1010-M100-3-76A9, 12/09/2007
HiPath 8000 - OpenStage Family, Administrator Manual
administration.fm
Administration
System Settings
3-29