Easy Trace Profiles; Bluetooth Headset; Call Connection - Siemens OpenStage 20 Administration

administration.fm
Administration
Diagnostics
3.16.6

Easy Trace Profiles

In order to simplify tracing for a specific problem, the tracing levels can be adjusted using pre-
defined settings. The Easy Trace profiles provide settings for a specific area, e. g. call connec-
tion. On pressing Submit, those pre-defined settings are sent to the phone. If desired, the set-
tings can be modified anytime using the general mask for trace configuration under
Diagnostics > Fault Trace Configuration (see Section 3.16.5, "Fault Trace Configuration").
Special EasyTrace profiles enable setting one level for all parameters with just one click (see
Section 3.16.6.19, "Common Levels for All Parameters").
The following sections describe the Easy Trace profiles available for the phone.
3.16.6.1

Bluetooth HeadSet

Administration via WBM
Easy Trace Profiles > Bluetooth HeadSetProfile
3.16.6.2

Call Connection

Administration via WBM
Easy Trace Profiles > Call connection
This Easy Trace profile contains the tracing of SIP messages. Please note that after
>
changing the level for the tracing of SIP messages, the phone must be rebooted.
3-114
A31003-O1010-M100-3-76A9, 12/09/2007
HiPath 8000 - OpenStage Family, Administrator Manual