Siemens OpenStage 20 Administration page 162

Hipath 8000
Hide thumbs Also See for OpenStage 20:
Table of Contents

Advertisement

administration.fm
Administration
Diagnostics
Non-compressing codecs / Compressing codes:
Lost packets (per 1000 packets): When the number of lost packets exceeds this maxi-
mum value during the observation interval, a report is created.
Default: 10.
Consecutive lost packets: When the number of lost packets following one another ex-
ceeds this maximum value during the observation interval, a report is created.
Default: 2.
Consecutive good packets: When the number of good packets following one another falls
below this minimum value, a report is created.
Default: 8.
Resend last report: If checked, the previous report is sent once again on pressing Sub-
mit.
Value range: „Yes", „No".
Default: „No".
The transmission of report data can be triggered manually by pressing Send now in the local
menu.
Administration via WBM
Diagnostics > QoS Reports > Generation
3-122
A31003-O1010-M100-3-76A9, 12/09/2007
HiPath 8000 - OpenStage Family, Administrator Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openstage 40Openstage 60Openstage 80

Table of Contents