Location - Rinnai FS 35 Operating And Installation Instructions

YOur
When positioning the heater, the main points governing the location are:
1. Flueing.
2. Warm air distribution.
3. The heater must not be installed where curtains or other combustible materials could come
into contact with it. In some cases, curtains may need restraining.
See below for minimum clearances required.
4. The heater is not designed to be built into bookcases or shelves or any combustible
opening.
5. Check that room ventilation complies with local regulations.
6. Check that an EARTHED power point is within 1500mm. of the right hand side of the
heater.
7. The heater does not require any additional hearth or fl oor protection.

LOCATION

6