IBM G8000 Installation Manual page 70

For your safety, a power cord with a ground attachment plug is available to order
for use with this product. To avoid electrical shock, always use the power cord and
plug with a properly grounded outlet.
Power cords for this product that are used in the United States and Canada are
listed by Underwriter's Laboratories (UL) and certified by the Canadian Standards
Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified
cord set consisting of a minimum of 18 AWG, Type SVT or SJT, three-conductor
cord, a maximum of 15 feet in length and a parallel blade, grounding-type
attachment plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S.): Use a UL-listed and
CSA-certified cord consisting of a minimum of 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set
with a grounding-type attachment plug. The cord set should have the appropriate
safety approvals for the country in which the equipment will be installed.
Power cords for this product for a specific country or region are usually available
only in that country or region.
54
IBM System Networking RackSwitch G8000: Installation Guide
Table 19. IBM RackSwitch G8000 replaceable parts (continued)
Description
Cable, 5m IBM passive
Cable, 8.5 m IBM passive
Cable, 2 m DC power
Kit, serial cable
Kit, 2-post rack mounting
IBM System Networking adjustable
19" 4-post rail
1U, air duct, 483 mm
Option part
Model number
G52 90Y9433
52F
HC3
HC4
G52 90Y9436
52F
HC3
HC4
CD8 Cable, 2 m DC
CFC power
HC8
HCC
G52 Not applicable
52F
HC3
HC4
G52 Not applicable
HC3
G52 00D6185
52F
HC3
HC4
1611-16E 00D6146
Tier 1 CRU part
number
90Y9432
90Y9435
Cable, 2 m DC
power
59Y1967
90Y3532
00D6119
00D6120