Appendix B Rdm Command - ETC D60 XTI User Manual

Appendix B
RDM Commands
The following table lists the RDM commands applicable to the Desire XTI fixtures.
Feature Get
Status Messages Yes
Supported
Yes
Parameters
Parameter
Yes
Description
Device Info Yes
Device Model
Yes
Description
Manufacturer
Yes
Label
Device Label Yes
Factory Defaults No
Software
Yes
Version Label
DMX Personality Yes
DMX Personality
Yes
Description
DMX Start
Yes
Address
Slot Info Yes
Slot Description Yes
Default Slot
Yes
Value
Sensor
Yes
Definition
Sensor Value Yes
Identify Device Yes
Reset Device No
LED Curve Yes
LED Curve
Yes
Description
RDM Commands
Set Queued
No Yes E120_STATUS_MESSAGES
No Yes E120_SUPPORTED_PARAMETERS
No Yes E120_PARAMETER_DESCRIPTION
No Yes E120_DEVICE_INFO
No Yes E120_DEVICE_MODEL_DESCRIPTION
No Yes E120_MANUFACTURER_LABEL
Yes Yes E120_DEVICE_LABEL
Yes Yes E120_FACTORY_DEFAULTS
No Yes E120_SOFTWARE_VERSION_LABEL
Yes Yes E120_DMX_PERSONALITY
No Yes E120_DMX_PERSONALITY_DESCRIPTION
Yes Yes E120_DMX_START_ADDRESS
No No E120_SLOT_INFO
No No E120_SLOT_DESCRIPTION
No No E120_DEFAULT_SLOT_VALUE
No Yes E120_SENSOR_DEFINITION
No Yes E120_SENSOR_VALUE
Yes Yes E120_IDENTIFY_DEVICE
Yes Yes E120_RESET_DEVICE
Yes Yes ETC_LED_CURVE
No Yes ETC_LED_CURVE_DESCRIPTION
RDM Parameter ID
Parameter
Enumerations
Values
— —
See RDM
—
E1.20-2006
See RDM
—
E1.20-2006
See RDM
—
E1.20-2006
ASCII string for
Model —
Description
ASCII string for
manufacturer —
label
ASCII string for
—
device label
None —
ASCII string for
—
software label
"7CH, 8CH, HSI,
0 thru 7 HSIC, RGB, EHSI,
EHSIC"
"7CH, 8CH, HSI,
0 thru 7 HSIC, RGB, EHSI,
EHSIC"
1 thru 512 DMX Address
— —
— —
— —
"LED1, LED2,
LED3, LED4, LED5,
0 thru 8 LED6, LED7, LED
Ambient, Control
Ambient"
"LED1, LED2,
LED3, LED4, LED5,
0 thru 8 LED6, LED7, LED
Ambient, Control
Ambient"
"Stop Identify,
"0, 1"
Start Identify"
— —
"Standard,
"0, 1, 2, 3" Incandescent,
Linear, Quick"
"Standard,
"0, 1, 2, 3" Incandescent,
Linear, Quick"
39