The Settings menu (with the
exception of Language J) is locked
with a code to prevent it being
accessed by unauthorised
personnel.
Back A
C
Language F
F
Supervisor level
^ Select Supervisor level and confirm
your selection.
Back A
C
Access via code
X
Change code...
^ Select Access via code and confirm
your selection.
To enter the code
You will now be asked to enter a
3-figure code. The code is set at 000 at
the factory. 0 0 0.
_ _
0
Enter code
^ Use the + button to enter the first
number. Confirm your selection of
this number by pressing the OK
button. Now enter the second digit.
Settings/Supervisor level menu
^ Repeat the process until all three
numbers have been entered.
^ After the last number has been
entered, press the OK button.
The following will appear in the display:
W
You are now in Supervisor level.
You can alter the code if you want to
prevent it being accessed by
unauthorised personnel.
Entry OK
Menu opened
69