Settings Menu - Supervisor Level - Miele PW 5064 Operating Instructions Manual

The Settings menu (except Suds
cooling, Contrast and Brightness) is
locked with a code to prevent
unauthorized access.
Contrast
C
Brightness
Supervisor level
^ Select Supervisor level and confirm.
Back A
C
Access via code...
Change code...
^ Select Access via code and confirm.
Enter code
A three digit code must be entered. The
code is factory-set to: 0 0 0.
0 _ _
Enter code
^ Enter the first digit with the + button.
Confirm the digit with OK. Now enter
the second digit.
^ Repeat this process until all three
digits have been entered.

Settings menu - Supervisor level

^ After entering the digits, press OK
and confirm the code by pressing
OK again.
You are now in the supervisor level.
You can now change the settings on
the previous and the following pages.
Change code
You can change the code to prevent
unauthorized access to the settings.
C Contrast
Brightness
Supervisor level
^ Select Supervisor level and confirm.
Back A
C
Change code...
^ Select Change code and confirm.
Follow the display prompts.
57