Selecting settings
To enter the code
Settings/Supervisor level menu
The Settings/Supervisor level is locked with a code to
prevent it being accessed by non-authorised personnel.
The Language J setting can still be altered.
Settings
^ Select Supervisor level and confirm your selection.
Settings
Supervisor level
^ Select Access via code and confirm your selection.
Enter the digits 0 0 0 (factory default setting). If you enter the
code wrongly three times, the machine will lock out for an
hour!
^ Turn the multi-function selector until the first number
appears. Then press it to confirm your selection of this
number. Now enter the second number.
Back A
Language F...
Supervisor level...
Back A
Access via code
0
_
_
Enter code
67