Table of Contents
Advertisement
Problem solving guide
The drum door cannot be opened by pressing the Door button
Possible cause
There is no power to the
machine.
Power cut.
The door was not
correctly engaged.
There is still water in the
drum and the machine is
unable to drain.
For safety reasons the drum door cannot be opened if the suds temperature is
higher than 50°C.
To continue a programme after an interruption to the power
supply
Possible cause
Power cut.
The machine has been
switched off and then
back on again with the K
button.
48
Check whether
– the machine is switched on.
– the electricity supply to the machine is switched
on.
– the fuse or circuit breaker has tripped.
Open the drum door as described in the next
section.
Press hard against the lock side of the drum door
and then press the Door button.
The drainage system may be blocked. Clean the
drainage system as described in the next section.
– Once power has been restored, switch the
machine on with the K button to continue the
programme.
– Confirm the message shown in the display, and
then press the Start button. The programme will
then continue with the next programme stage.
Remedy
Remedy
Advertisement
Table of Contents
