Table of Contents
Advertisement
Low water pressure
This setting should be activated to
ensure the correct amount of water is
taken into the machine in areas
where the water pressure is
constantly low (below 100 kPa /
1 bar).
The machine is delivered with the Low
water pressure option deselected.
Cottons level
You can increase the water level for
the main wash in the Cottons
programme.
The machine is delivered with the Block
parameters option selected (the water
level will be controlled according to the
programme data which has been
programmed on-site).
Minimum iron level
You can increase the water level for
the main wash in the Minimum iron
programme.
The machine is delivered with the Block
parameters option selected (the water
level will be controlled according to the
programme data which has been
programmed on-site).
Settings/Supervisor level menu
Temperature pre-wash
You can choose the temperature you
want the pre-wash to be carried out
at in the Cottons and
Grease and fat + programme.
The machine is delivered with the Block
parameters option selected (the
temperature will be controlled
according to the programme data
which has been programmed on-site).
Pre-wash duration
You can lengthen the duration of the
pre-wash.
The machine is delivered with the Block
parameters option selected (the wash
duration will be controlled according to
the programme data which has been
programmed on-site).
Cottons duration
You can increase the wash duration
for the main wash in the Cottons
programme.
The machine is delivered with the Block
parameters option selected (the wash
duration will be controlled according to
the programme data which has been
programmed on-site).
73
Advertisement
Table of Contents
