Table of Contents
Advertisement
Symbols:
d = Low water level
( = Medium water level
e = High water level
a
= Normal wash rhythm
b
= Gentle action
c
= Woollens
This machine has fully electronic
controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
The display shows the stage the
programme has reached.
Programme sequence
Special features in the programme
sequences:
Anti-crease:
At the end of the programme, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
The door can be opened and items
removed at any time during the
anti-crease phase. Exception:
Anti-crease does not operate on the
Woollens programme.
1)
Pre-rinse: A pre-rinse without
detergent is carried out automatically
to remove dust.
2)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate the pillows.
Subsequent water intake for the main
wash is through compartment j.
3)
In the Outerwear programme,
laundry is only spun after the main
wash.
4)
A third rinse is carried out in the
Flour + programme.
33
Advertisement
Table of Contents
