Canon imageRUNNER ADVANCE 8085 Maintenance Manual page 52

2
Select the finishing mode you want to limit.
1
3
Select [On] or [Off] → press [OK].
4
Press [Close].
The Limited Functions Mode is enabled only after you restart the machine (the main power is turned OFF, and then back ON). For
instructions on restarting (turning the main power OFF, and then back ON) the machine, see e-Manual > Before You Start Using This
Machine.
1-40 Staple Finisher-F1 PRO/Booklet Finisher-F1 PRO/Puncher Unit-BB1/Booklet Trimmer-D1 (Optional)