Canon imageRUNNER ADVANCE 8085 Maintenance Manual page 35

13
Align the inner size change plate with the marks for the desired paper size.
•
Make sure to align the inner size change plate properly with the marks for the desired paper size. There are two locations with marks for
the paper size on the top of the inner size change plate. Align the inner size change plate with the desired marks.
•
Make sure that the size change plate is properly aligned with the marks for the desired paper size. If the size change plate is not properly
aligned, the POD Deck Lite may become damaged.
14
Fix the inner size change plate with the two blue screws using a coin or something similar, while
slightly holding its center front portion, and pressing it away from you.
Fasten the right blue screw before fastening the left blue screw.
If you fasten the blue screws without pressing the inner size change plate away from you, the plate may be fixed at an angle. If you use
the paper deck with a tilted inner size change plate, paper may be fed as slanted, poor print quality may result, and paper jams may
occur. Therefore, make sure to fasten the blue screw while pressing the inner size change plate away from you.
B4
B5
11 17/LTR
A3
A4
12 18
305 457 12 5 / 17 11 /
mm mm 8 16
320 450
mm mm
13 19
(SRA3)
330 483
mm mm
Paper Deck Unit-C1/POD Deck Lite-A1 (Optional)
1
1-23