Canon imageRUNNER ADVANCE 8085 Maintenance Manual page 128

9
Remove any jammed paper inside the saddle stitcher unit.
2
10
Turn the dial on the pressing unit (F-C6) in the direction of the arrow (counterclockwise), and push it
as far left as it will go.
If the pressing unit is in its proper position, this procedure is unnecessary.
The pressing unit is for ensuring a clean fold in the center of the paper to create a booklet. If the pressing unit is not in its proper position,
the paper to be saddle stitched cannot be fed to the booklet tray.
11
While pushing in the dial (F-C7), turn it in the direction of the arrow (clockwise) until the lamp turns
off. Remove any jammed paper.
2-52 Clearing Paper Jams
1. Open the right cover of the saddle stitcher unit (F-C5).
2. Remove any jammed paper.
3. Close the right cover of the stitcher unit (F-C5).