2
Pull out the punch waste tray.
3
Discard the punch waste into a receptacle.
Make sure that the punch waste tray is completely emptied.
4
Return the punch waste tray to its original position.
Always make sure to insert the punch waste tray far as it can go, until it clicks into place.
If the punch waste tray is not securely in place, you cannot make copies or prints in the Hole Punch mode.
5
Close the front cover of the finisher.
Staple Finisher-D1/Booklet Finisher-D1/Puncher Unit-BF1/Inner Booklet Trimmer-A1 (Optional)
1
1-51